TIMKEN KL44649-KL44610 Bearing

TIMKEN KL44649-KL44610 tapered roller bearings

Also known as : KL44649-KL44610

• Inside Diameter: 26.988 mm
• Outside Diameter: 50.292 mm
• Width: 14.224 mm
• Basic dynamic load rating: 30.1 kN
• Basic static load rating: 32.9 kN

Inquire Now

TIMKEN KL44649-KL44610 Bearing

Series	L44600
model	KL44649-KL44610
Cone Part Number	KL44649
Cup Part Number	KL44610
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	26.988 mm 1.0625 in
D - Cup Outer Diameter	50.292 mm 1.9800 in
B - Cone Width	14.732 mm 0.5800 in
C - Cup Width	10.668 mm 0.4200 in
T - Bearing Width	14.224 mm 0.5600 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.560 mm 0.14 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	30.99 mm 1.22 in
db - Cone Backface Backing Diameter	37.59 mm 1.48 in
Da - Cup Frontface Backing Diameter	47.50 mm 1.87 in
Db - Cup Backface Backing Diameter	44.45 mm 1.75 in
Ab - Cage-Cone Frontface Clearance	1.3 mm 0.05 in
Aa - Cage-Cone Backface Clearance	0.5 mm 0.02 in
a - Effective Center Location	-3.30 mm -0.13 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	7790 N 1750 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	30100 N 6760 lbf
C0 - Static Radial Rating	32900 N 7400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	4990 N 1120 lbf
Factors
K - Factor	1.56
e - ISO Factor	0.37
Y - ISO Factor	1.60
G1 - Heat Generation Factor (Roller-Raceway)	8.9
G2 - Heat Generation Factor (Rib-Roller End)	8.9
Cg - Geometry Factor	0.0526

TIMKEN KL44649-KL44610 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.