TIMKEN L45449-L45410 Bearing

TIMKEN L45449-L45410 tapered roller bearings

Also known as : L45449-L45410

• Inside Diameter: 28.999 mm
• Outside Diameter: 50.292 mm
• Width: 14.224 mm
• Basic dynamic load rating: 35.5 kN
• Basic static load rating: 36.2 kN

Inquire Now

TIMKEN L45449-L45410 Bearing

Series	L45400
model	L45449-L45410
Cone Part Number	L45449
Cup Part Number	L45410
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.20 lb
Dimensions
d - Bore	28.999 mm 1.1417 in
D - Cup Outer Diameter	50.292 mm 1.9800 in
B - Cone Width	14.732 mm 0.5800 in
C - Cup Width	10.668 mm 0.4200 in
T - Bearing Width	14.224 mm 0.5600 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.560 mm 0.14 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	33.53 mm 1.32 in
db - Cone Backface Backing Diameter	39.88 mm 1.57 in
Da - Cup Frontface Backing Diameter	48.51 mm 1.91 in
Db - Cup Backface Backing Diameter	44.45 mm 1.75 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-3.30 mm -0.13 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	9200 N 2070 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	35500 N 7980 lbf
C0 - Static Radial Rating	36200 N 8130 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	5820 N 1310 lbf
Factors
K - Factor	1.58
e - ISO Factor	0.37
Y - ISO Factor	1.62
G1 - Heat Generation Factor (Roller-Raceway)	10.8
G2 - Heat Generation Factor (Rib-Roller End)	12.4
Cg - Geometry Factor	0.0559

TIMKEN L45449-L45410 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.