TIMKEN M84549-M84510 Bearing

TIMKEN M84549-M84510 tapered roller bearings

Also known as : M84549-M84510

• Inside Diameter: 26.988 mm
• Outside Diameter: 57.15 mm
• Width: 19.431 mm
• Basic dynamic load rating: 48.5 kN
• Basic static load rating: 52.9 kN

Inquire Now

TIMKEN M84549-M84510 Bearing

Series	M84500
model	M84549-M84510
Cone Part Number	M84549
Cup Part Number	M84510
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
Dimensions
d - Bore	26.988 mm 1.0625 in
D - Cup Outer Diameter	57.150 mm 2.2500 in
B - Cone Width	19.431 mm 0.7650 in
C - Cup Width	14.732 mm 0.5800 in
T - Bearing Width	19.431 mm 0.7650 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	33.02 mm 1.30 in
db - Cone Backface Backing Diameter	38.61 mm 1.52 in
Da - Cup Frontface Backing Diameter	55.10 mm 2.17 in
Db - Cup Backface Backing Diameter	48.51 mm 1.91 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	0.8 mm 0.03 in
a - Effective Center Location	-3 mm -0.12 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	12600 N 2830 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	48500 N 10900 lbf
C0 - Static Radial Rating	52900 N 11900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	11800 N 2640 lbf
Factors
K - Factor	1.07
e - ISO Factor	0.55
Y - ISO Factor	1.1
G1 - Heat Generation Factor (Roller-Raceway)	11.3
G2 - Heat Generation Factor (Rib-Roller End)	7.39
Cg - Geometry Factor	0.0644

TIMKEN M84549-M84510 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.