TIMKEN 440-432D bearings | 38.1x95.25x61.915mm
Also known as : 440-432D
- Inside Diameter: 38.1 mm
- Outside Diameter: 95.25 mm
- Width: 61.915 mm
- Basic dynamic load rating: 221 kN
- Basic static load rating: 57.3 kN
TIMKEN 440-432D Bearing
TIMKEN 440-432D Bearing details
| TIMKEN Part Number | 440-432D |
|---|---|
| Brand | TIMKEN |
| Type | Tapered Roller Bearings - TDO (Tapered Double Inner) |
| Series | 435 |
| Cone Part Number | 440 |
| Cup Part Number | 432D |
| Design Units | Imperial |
| Bearing Weight |
4.83 lb 2.191 Kg |
| Cage Type | Stamped Steel |
| Ab - Cage-Cone Frontface Clearance |
0.05 in 1.3 mm |
| Alternate Part Name | 440-432D |
| d - Bore |
1.5 in 38.1 mm |
| D - Cup Outer Diameter |
3.7500 in 95.250 mm |
| B - Cone Width |
1.1772 in 29.901 mm |
| C - Double Cup Width |
2.0000 in 50.800 mm |
| T - Bearing Width across Cones |
2.4376 in 61.915 mm |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
7400 lbf 32900 N |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
49700 lbf 221000 N |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
12900 lbf 57300 N |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
3600 lbf 16000 N |
| K - Factor | 2.05 |
| e - ISO Factor | 0.28 |
| Y1 - ISO Factor | 2.37 |
| Y2 - ISO Factor | 3.53 |
| G1 - Heat Generation Factor (Roller-Raceway) | 42.5 |
| G2 - Heat Generation Factor (Rib-Roller End) | 11.3 |
| Cg - Geometry Factor | 0.0805 |
| R - Cone Backface "To Clear" Radius |
0.03 in 0.800 mm |
| r - Cup Frontface "To Clear" Radius |
0.03 in 0.8 mm |
| db - Cone Backface Backing Diameter |
1.83 in 46.5 mm |
| Da - Cup Frontface Backing Diameter |
3.46 in 87.12 mm |
| Aa - Cage-Cone Backface Clearance |
0.04 in 1 mm |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 440-432D Tapered Roller Bearings - TDO (Tapered Double Inner) in stock.
TIMKEN bearing cross reference
TIMKEN 440-432AB bearing
38.1mm x 92.075mm x 11.115mm
TIMKEN 440-432-B bearing
38.1mm x 95.250mm x 11.115mm