TIMKEN 767D - 752 Bearing

TIMKEN 767D - 752 Tapered Roller Bearings

Also known as : 767D - 752

• Inside Diameter: 88.9 mm
• Outside Diameter: 161.925 mm
• Width: 107.95 mm
• Basic dynamic load rating: 570 kN
• Basic static load rating: 148 kN

Inquire Now

TIMKEN 767D - 752 Bearing

Bearing Number	767D - 752
Brand	TIMKEN
Type	Tapered Roller Bearings - TDI (Tapered Double Inner)
Series	755
Cone Part Number	767D
Cup Part Number	752
Design Units	Imperial
Bearing Weight	18.400 lb 8.3 Kg
Cage Type	Stamped Steel
Aa - Cage-Cone Backface Clearance	0 in 0 mm
d - Bore	3.5000 in 88.900 mm
D - Cup Outer Diameter	6.3750 in 161.925 mm
B - Double Cone Width	4.2500 in 107.950 mm
C - Cup Width	1.5000 in 38.100 mm
T - Bearing Width across Cups	3.9979 in 101.547 mm
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)	19100 lbf 84800 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)	128000 lbf 570000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)	33200 lbf 148000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)	11100 lbf 49500 N
K - Factor	1.71
e - ISO Factor	0.72
Y1 - ISO Factor	0.94
Y2 - ISO Factor	1.4
G1 - Heat Generation Factor (Roller-Raceway)	177
G2 - Heat Generation Factor (Rib-Roller End)	32.4
Cg - Geometry Factor	0.0945
R - Cone Frontface "To Clear" Radius	0.060 in 1.50 mm
r - Cup Backface "To Clear" Radius	0.130 in 3.30 mm
da - Cone Frontface Backing Diameter	3.99 in 101.3 mm
Db - Cup Backface Backing Diameter	5.67 in 144.00 mm
Ab - Cage-Cone Frontface Clearance	-0.03 in -0.8 mm

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 767D - 752 Tapered Roller Bearings - TDI (Tapered Double Inner) in stock.