TIMKEN 07087-07204-B tapered bearings with Flange
Also known as : 07087-07204-B
- Inside Diameter: 22.225 mm
- Outside Diameter: 51.994 mm
- Width: 5.08 mm
- Basic dynamic load rating: 29100 kN
- Basic static load rating: 29600 kN
TIMKEN 07087-07204-B Bearing
TIMKEN 07087-07204-B Bearing details
Series | 07000 |
---|---|
model | 07087-07204-B |
Cone Part Number | 07087 |
Cup Part Number | 07204-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight | 0.200 Kg 0.30 lb |
Dimensions | |
d - Bore | 22.225 mm 0.8750 in |
D - Cup Outer Diameter | 51.994 mm 2.0470 in |
D1 - Flange Outer Diameter | 55.855 mm 2.1990 in |
B - Cone Width | 14.260 mm 0.5614 in |
C - Cup Width | 12.700 mm 0.5000 in |
C1 - Cup Flange Width | 2.769 mm 0.1090 in |
T - Bearing Width to Flange | 5.080 mm 0.2000 in |
T1 - Bearing Width | 15.011 mm 0.5910 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius | 1.300 mm 0.050 in |
r - Cup Backface "To Clear" Radius | 1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter | 26.90 mm 1.06 in |
db - Cone Backface Backing Diameter | 28.40 mm 1.12 in |
Da - Cup Frontface Backing Diameter | 50.04 mm 2.01 in |
Ab - Cage-Cone Frontface Clearance | 2 mm 0.08 in |
Aa - Cage-Cone Backface Clearance | 0 mm 0 in |
a - Effective Center Location | -2.8 mm -0.11 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) | 7550 N 1700 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) | 29100 N 6540 lbf |
C0 - Static Radial Rating | 29600 N 6650 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) | 5190 N 1170 lbf |
Factors | |
K - Factor | 1.45 |
e - ISO Factor | 0.40 |
Y - ISO Factor | 1.49 |
G1 - Heat Generation Factor (Roller-Raceway) | 7.6 |
G2 - Heat Generation Factor (Rib-Roller End) | 7.07 |
Cg - Geometry Factor | 0.0509 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 07087-07204-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.