TIMKEN 08125-08231-B tapered bearings with Flange
Also known as : 08125-08231-B
- Inside Diameter: 31.75 mm
- Outside Diameter: 58.738 mm
- Width: 6.736 mm
- Basic dynamic load rating: 31.7 kN
- Basic static load rating: 35 kN
TIMKEN 08125-08231-B Bearing
TIMKEN 08125-08231-B Bearing details
Series | 08000 |
---|---|
model | 08125-08231-B |
Cone Part Number | 08125 |
Cup Part Number | 08231-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.300 Kg 0.70 lb |
Dimensions | |
d - Bore |
31.750 mm 1.2500 in |
D - Cup Outer Diameter |
58.738 mm 2.3125 in |
D1 - Flange Outer Diameter |
62.598 mm 2.4645 in |
B - Cone Width |
15.080 mm 0.5937 in |
C - Cup Width |
10.716 mm 0.4219 in |
C1 - Cup Flange Width |
2.769 mm 0.1090 in |
T - Bearing Width to Flange |
6.736 mm 0.2652 in |
T1 - Bearing Width |
14.684 mm 0.5781 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1 mm 0.04 in |
r - Cup Backface "To Clear" Radius |
1 mm 0.04 in |
da - Cone Frontface Backing Diameter |
36.10 mm 1.42 in |
db - Cone Backface Backing Diameter |
37.60 mm 1.48 in |
Da - Cup Frontface Backing Diameter |
57.40 mm 2.26 in |
Ab - Cage-Cone Frontface Clearance |
1.8 mm 0.07 in |
Aa - Cage-Cone Backface Clearance |
0.5 mm 0.02 in |
a - Effective Center Location |
-1.3 mm -0.05 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
8220 N 1850 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
31700 N 7130 lbf |
C0 - Static Radial Rating |
35000 N 7880 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
6670 N 1500 lbf |
Factors | |
K - Factor | 1.23 |
e - ISO Factor | 0.47 |
Y - ISO Factor | 1.27 |
G1 - Heat Generation Factor (Roller-Raceway) | 10.7 |
G2 - Heat Generation Factor (Rib-Roller End) | 10.6 |
Cg - Geometry Factor | 0.0601 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 08125-08231-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.