TIMKEN 12175-12303-B tapered bearings with Flange
Also known as : 12175-12303-B
- Inside Diameter: 44.45 mm
- Outside Diameter: 76.992 mm
- Width: 9.126 mm
- Basic dynamic load rating: 49.5 kN
- Basic static load rating: 58.1 kN
TIMKEN 12175-12303-B Bearing
TIMKEN 12175-12303-B Bearing details
Series | 12000 |
---|---|
model | 12175-12303-B |
Cone Part Number | 12175 |
Cup Part Number | 12303-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.100 Kg 2.50 lb |
Dimensions | |
d - Bore |
44.450 mm 1.7500 in |
D - Cup Outer Diameter |
76.992 mm 3.0312 in |
D1 - Flange Outer Diameter |
80.564 mm 3.1718 in |
B - Cone Width |
17.145 mm 0.6750 in |
C - Cup Width |
11.908 mm 0.4688 in |
C1 - Cup Flange Width |
3.571 mm 0.1406 in |
T - Bearing Width to Flange |
9.126 mm 0.3593 in |
T1 - Bearing Width |
17.463 mm 0.6875 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1.5 mm 0.06 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
49.5 mm 1.95 in |
db - Cone Backface Backing Diameter |
52.1 mm 2.05 in |
Da - Cup Frontface Backing Diameter |
74.93 mm 2.99 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
1 mm 0.04 in |
a - Effective Center Location |
0 mm 0 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
12800 N 2890 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
49500 N 11100 lbf |
C0 - Static Radial Rating |
58100 N 13100 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
11100 N 2500 lbf |
Factors | |
K - Factor | 1.15 |
e - ISO Factor | 0.51 |
Y - ISO Factor | 1.19 |
G1 - Heat Generation Factor (Roller-Raceway) | 21 |
G2 - Heat Generation Factor (Rib-Roller End) | 15.8 |
Cg - Geometry Factor | 0.0766 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 12175-12303-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.