TIMKEN 1380-1328-B tapered bearings with Flange
Also known as : 1380-1328-B
- Inside Diameter: 22.225 mm
- Outside Diameter: 52.388 mm
- Width: 9.042 mm
- Basic dynamic load rating: 47900 kN
- Basic static load rating: 48300 kN
TIMKEN 1380-1328-B Bearing
TIMKEN 1380-1328-B Bearing details
Series | 1300 |
---|---|
model | 1380-1328-B |
Cone Part Number | 1380 |
Cup Part Number | 1328-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight | 0.100 Kg 0.30 lb |
Dimensions | |
d - Bore | 22.225 mm 0.8750 in |
D - Cup Outer Diameter | 52.388 mm 2.0625 in |
D1 - Flange Outer Diameter | 56.253 mm 2.2147 in |
B - Cone Width | 20.168 mm 0.7940 in |
C - Cup Width | 14.288 mm 0.5625 in |
C1 - Cup Flange Width | 3.962 mm 0.1560 in |
T - Bearing Width to Flange | 9.042 mm 0.3560 in |
T1 - Bearing Width | 19.368 mm 0.7625 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius | 1.5 mm 0.06 in |
r - Cup Backface "To Clear" Radius | 1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter | 26.90 mm 1.06 in |
db - Cone Backface Backing Diameter | 29.5 mm 1.16 in |
Da - Cup Frontface Backing Diameter | 50.04 mm 2.01 in |
Ab - Cage-Cone Frontface Clearance | 1.8 mm 0.07 in |
Aa - Cage-Cone Backface Clearance | 0.8 mm 0.03 in |
a - Effective Center Location | -7.6 mm -0.3 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) | 12400 N 2790 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) | 47900 N 10800 lbf |
C0 - Static Radial Rating | 48300 N 10900 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) | 6200 N 1390 lbf |
Factors | |
K - Factor | 2 |
e - ISO Factor | 0.29 |
Y - ISO Factor | 2.05 |
G1 - Heat Generation Factor (Roller-Raceway) | 10.3 |
G2 - Heat Generation Factor (Rib-Roller End) | 5.21 |
Cg - Geometry Factor | 0.0508 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 1380-1328-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.