TIMKEN 13889-13836-B tapered bearings with Flange
Also known as : 13889-13836-B
- Inside Diameter: 38.1 mm
- Outside Diameter: 65.088 mm
- Width: 5.944 mm
- Basic dynamic load rating: 27.2 kN
- Basic static load rating: 33 kN
TIMKEN 13889-13836-B Bearing
TIMKEN 13889-13836-B Bearing details
Series | 13800 |
---|---|
model | 13889-13836-B |
Cone Part Number | 13889 |
Cup Part Number | 13836-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.300 Kg 0.70 lb |
Dimensions | |
d - Bore |
38.1 mm 1.5 in |
D - Cup Outer Diameter |
65.088 mm 2.5625 in |
D1 - Flange Outer Diameter |
68.161 mm 2.6835 in |
B - Cone Width |
11.908 mm 0.4688 in |
C - Cup Width |
9.525 mm 0.3750 in |
C1 - Cup Flange Width |
2.769 mm 0.1090 in |
T - Bearing Width to Flange |
5.944 mm 0.2340 in |
T1 - Bearing Width |
12.700 mm 0.5000 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1.5 mm 0.06 in |
r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
da - Cone Frontface Backing Diameter |
42.40 mm 1.67 in |
db - Cone Backface Backing Diameter |
45 mm 1.77 in |
Da - Cup Frontface Backing Diameter |
64.00 mm 2.52 in |
Ab - Cage-Cone Frontface Clearance |
2 mm 0.08 in |
Aa - Cage-Cone Backface Clearance |
-0.3 mm -0.01 in |
a - Effective Center Location |
-0.8 mm -0.03 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
7040 N 1580 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
27200 N 6100 lbf |
C0 - Static Radial Rating |
33000 N 7430 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
4170 N 938 lbf |
Factors | |
K - Factor | 1.69 |
e - ISO Factor | 0.35 |
Y - ISO Factor | 1.73 |
G1 - Heat Generation Factor (Roller-Raceway) | 14.8 |
G2 - Heat Generation Factor (Rib-Roller End) | 23.3 |
Cg - Geometry Factor | 0.0601 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 13889-13836-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.