TIMKEN 13890-13836-B tapered bearings with Flange
Also known as : 13890-13836-B
- Inside Diameter: 38.481 mm
- Outside Diameter: 65.088 mm
- Width: 5.944 mm
- Basic dynamic load rating: 272 kN
- Basic static load rating: 33 kN
TIMKEN 13890-13836-B Bearing
TIMKEN 13890-13836-B Bearing details
| Series | 13800 |
|---|---|
| model | 13890-13836-B |
| Cone Part Number | 13890 |
| Cup Part Number | 13836-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
0.300 Kg 0.60 lb |
| Dimensions | |
| d - Bore |
38.481 mm 1.5150 in |
| D - Cup Outer Diameter |
65.088 mm 2.5625 in |
| D1 - Flange Outer Diameter |
68.161 mm 2.6835 in |
| B - Cone Width |
11.908 mm 0.4688 in |
| C - Cup Width |
9.525 mm 0.3750 in |
| C1 - Cup Flange Width |
2.769 mm 0.1090 in |
| T - Bearing Width to Flange |
5.944 mm 0.2340 in |
| T1 - Bearing Width |
12.700 mm 0.5000 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
0.400 mm 0.015 in |
| r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
| da - Cone Frontface Backing Diameter |
42.90 mm 1.69 in |
| db - Cone Backface Backing Diameter |
42.90 mm 1.69 in |
| Da - Cup Frontface Backing Diameter |
64.00 mm 2.52 in |
| Ab - Cage-Cone Frontface Clearance |
2 mm 0.08 in |
| Aa - Cage-Cone Backface Clearance |
-0.3 mm -0.01 in |
| a - Effective Center Location |
-0.8 mm -0.03 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
7040 N 1580 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
27200 N 6100 lbf |
| C0 - Static Radial Rating |
33000 N 7430 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
4170 N 938 lbf |
| Factors | |
| K - Factor | 1.69 |
| e - ISO Factor | 0.35 |
| Y - ISO Factor | 1.73 |
| G1 - Heat Generation Factor (Roller-Raceway) | 14.8 |
| G2 - Heat Generation Factor (Rib-Roller End) | 23.3 |
| Cg - Geometry Factor | 0.0601 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 13890-13836-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
TIMKEN bearing cross reference
