TIMKEN 14118-14276-B Bearing

TIMKEN 14118-14276-B tapered bearings with Flange

Also known as : 14118-14276-B

• Inside Diameter: 30 mm
• Outside Diameter: 69.012 mm
• Width: 7.932 mm
• Basic dynamic load rating: 54.6 kN
• Basic static load rating: 61.7 kN

Inquire Now

TIMKEN 14118-14276-B Bearing

Series	14000
model	14118-14276-B
Cone Part Number	14118
Cup Part Number	14276-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
Dimensions
d - Bore	30 mm 1.1811 in
D - Cup Outer Diameter	69.012 mm 2.7170 in
D1 - Flange Outer Diameter	72.873 mm 2.8690 in
B - Cone Width	19.202 mm 0.7560 in
C - Cup Width	15.875 mm 0.6250 in
C1 - Cup Flange Width	3.962 mm 0.1560 in
T - Bearing Width to Flange	7.932 mm 0.3123 in
T1 - Bearing Width	19.845 mm 0.7813 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.800 mm 0.03 in
r - Cup Backface "To Clear" Radius	0.80 mm 0.030 in
da - Cone Frontface Backing Diameter	36.60 mm 1.44 in
db - Cone Backface Backing Diameter	37.10 mm 1.46 in
Da - Cup Frontface Backing Diameter	65.02 mm 2.60 in
Ab - Cage-Cone Frontface Clearance	2.3 mm 0.09 in
Aa - Cage-Cone Backface Clearance	0.5 mm 0.02 in
a - Effective Center Location	-4.3 mm -0.17 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	14200 N 3180 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	54600 N 12300 lbf
C0 - Static Radial Rating	61700 N 13900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	9260 N 2080 lbf
Factors
K - Factor	1.53
e - ISO Factor	0.38
Y - ISO Factor	1.57
G1 - Heat Generation Factor (Roller-Raceway)	18
G2 - Heat Generation Factor (Rib-Roller End)	9.4
Cg - Geometry Factor	0.0668

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 14118-14276-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.