TIMKEN 15578-15520-B tapered bearings with Flange
Also known as : 15578-15520-B
- Inside Diameter: 25.4 mm
- Outside Diameter: 57.15 mm
- Width: 7.938 mm
- Basic dynamic load rating: 54.5 kN
- Basic static load rating: 50.1 kN
TIMKEN 15578-15520-B Bearing
TIMKEN 15578-15520-B Bearing details
Series | 15500 |
---|---|
model | 15578-15520-B |
Cone Part Number | 15578 |
Cup Part Number | 15520-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.400 Kg 0.80 lb |
Dimensions | |
d - Bore |
25.400 mm 1.0000 in |
D - Cup Outer Diameter |
57.150 mm 2.2500 in |
D1 - Flange Outer Diameter |
61.016 mm 2.4022 in |
B - Cone Width |
17.463 mm 0.6875 in |
C - Cup Width |
13.495 mm 0.5313 in |
C1 - Cup Flange Width |
3.970 mm 0.1563 in |
T - Bearing Width to Flange |
7.938 mm 0.3125 in |
T1 - Bearing Width |
17.463 mm 0.6875 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1.300 mm 0.050 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
30.5 mm 1.2 in |
db - Cone Backface Backing Diameter |
32.5 mm 1.28 in |
Da - Cup Frontface Backing Diameter |
59.94 mm 2.40 in |
Ab - Cage-Cone Frontface Clearance |
2.5 mm 0.1 in |
Aa - Cage-Cone Backface Clearance |
0 mm 0 in |
a - Effective Center Location |
-5.1 mm -0.2 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
14100 N 3180 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
54500 N 12300 lbf |
C0 - Static Radial Rating |
50100 N 11300 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
8380 N 1880 lbf |
Factors | |
K - Factor | 1.69 |
e - ISO Factor | 0.35 |
Y - ISO Factor | 1.73 |
G1 - Heat Generation Factor (Roller-Raceway) | 12.7 |
G2 - Heat Generation Factor (Rib-Roller End) | 10.3 |
Cg - Geometry Factor | 0.0577 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 15578-15520-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.