TIMKEN 18204X-18337-B tapered bearings with Flange
Also known as : 18204X-18337-B
- Inside Diameter: 51.999 mm
- Outside Diameter: 85.725 mm
- Width: 9.906 mm
- Basic dynamic load rating: 51.6 kN
- Basic static load rating: 63.9 kN
TIMKEN 18204X-18337-B Bearing
TIMKEN 18204X-18337-B Bearing details
Series | 18000 |
---|---|
model | 18204X-18337-B |
Cone Part Number | 18204X |
Cup Part Number | 18337-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.600 Kg 1.20 lb |
Dimensions | |
d - Bore |
51.999 mm 2.0472 in |
D - Cup Outer Diameter |
85.725 mm 3.3750 in |
D1 - Flange Outer Diameter |
89.586 mm 3.5270 in |
B - Cone Width |
18.263 mm 0.7190 in |
C - Cup Width |
12.700 mm 0.5000 in |
C1 - Cup Flange Width |
3.556 mm 0.1400 in |
T - Bearing Width to Flange |
9.906 mm 0.3900 in |
T1 - Bearing Width |
19.050 mm 0.7500 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
2.000 mm 0.080 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
56.90 mm 2.24 in |
db - Cone Backface Backing Diameter |
59.90 mm 2.36 in |
Da - Cup Frontface Backing Diameter |
83.57 mm 3.29 in |
Ab - Cage-Cone Frontface Clearance |
2.3 mm 0.09 in |
Aa - Cage-Cone Backface Clearance |
1.8 mm 0.07 in |
a - Effective Center Location |
2 mm 0.08 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
13400 N 3010 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
51600 N 11600 lbf |
C0 - Static Radial Rating |
63900 N 14400 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
13000 N 2920 lbf |
Factors | |
K - Factor | 1.03 |
e - ISO Factor | 0.57 |
Y - ISO Factor | 1.06 |
G1 - Heat Generation Factor (Roller-Raceway) | 26.1 |
G2 - Heat Generation Factor (Rib-Roller End) | 20.3 |
Cg - Geometry Factor | 0.0852 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 18204X-18337-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.