TIMKEN 19138X-19283-B tapered bearings with Flange
Also known as : 19138X-19283-B
- Inside Diameter: 35.001 mm
- Outside Diameter: 71.999 mm
- Width: 6.287 mm
- Basic dynamic load rating: 50.7 kN
- Basic static load rating: 57.8 kN
TIMKEN 19138X-19283-B Bearing
TIMKEN 19138X-19283-B Bearing details
Series | 19000 |
---|---|
model | 19138X-19283-B |
Cone Part Number | 19138X |
Cup Part Number | 19283-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.400 Kg 1.00 lb |
Dimensions | |
d - Bore |
35.001 mm 1.3780 in |
D - Cup Outer Diameter |
71.999 mm 2.8346 in |
D1 - Flange Outer Diameter |
75.857 mm 2.9865 in |
B - Cone Width |
16.520 mm 0.6504 in |
C - Cup Width |
14.288 mm 0.5625 in |
C1 - Cup Flange Width |
3.556 mm 0.1400 in |
T - Bearing Width to Flange |
6.287 mm 0.2475 in |
T1 - Bearing Width |
17.018 mm 0.6700 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
2.000 mm 0.080 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
40.40 mm 1.59 in |
db - Cone Backface Backing Diameter |
43.40 mm 1.71 in |
Da - Cup Frontface Backing Diameter |
69.09 mm 2.72 in |
Ab - Cage-Cone Frontface Clearance |
2.3 mm 0.09 in |
Aa - Cage-Cone Backface Clearance |
0.8 mm 0.03 in |
a - Effective Center Location |
-1.5 mm -0.06 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
13100 N 2960 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
50700 N 11400 lbf |
C0 - Static Radial Rating |
57800 N 13000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
10000 N 2250 lbf |
Factors | |
K - Factor | 1.31 |
e - ISO Factor | 0.44 |
Y - ISO Factor | 1.35 |
G1 - Heat Generation Factor (Roller-Raceway) | 17.5 |
G2 - Heat Generation Factor (Rib-Roller End) | 11.5 |
Cg - Geometry Factor | 0.0694 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 19138X-19283-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.