TIMKEN 23100-23256-B tapered bearings with Flange
Also known as : 23100-23256-B
- Inside Diameter: 25.4 mm
- Outside Diameter: 65.088 mm
- Width: 10.32 mm
- Basic dynamic load rating: 54.6 kN
- Basic static load rating: 55.8 kN
TIMKEN 23100-23256-B Bearing
TIMKEN 23100-23256-B Bearing details
Series | 23000 |
---|---|
model | 23100-23256-B |
Cone Part Number | 23100 |
Cup Part Number | 23256-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.600 Kg 1.30 lb |
Dimensions | |
d - Bore |
25.400 mm 1.0000 in |
D - Cup Outer Diameter |
65.088 mm 2.5625 in |
D1 - Flange Outer Diameter |
68.953 mm 2.7147 in |
B - Cone Width |
21.463 mm 0.8450 in |
C - Cup Width |
15.875 mm 0.6250 in |
C1 - Cup Flange Width |
3.970 mm 0.1563 in |
T - Bearing Width to Flange |
10.320 mm 0.4063 in |
T1 - Bearing Width |
22.225 mm 0.8750 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1.5 mm 0.06 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
34.5 mm 1.36 in |
db - Cone Backface Backing Diameter |
39.10 mm 1.54 in |
Da - Cup Frontface Backing Diameter |
64.00 mm 2.52 in |
Ab - Cage-Cone Frontface Clearance |
2.5 mm 0.1 in |
Aa - Cage-Cone Backface Clearance |
3 mm 0.12 in |
a - Effective Center Location |
-2.3 mm -0.09 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
14200 N 3180 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
54600 N 12300 lbf |
C0 - Static Radial Rating |
55800 N 12500 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
17700 N 3990 lbf |
Factors | |
K - Factor | 0.8 |
e - ISO Factor | 0.73 |
Y - ISO Factor | 0.82 |
G1 - Heat Generation Factor (Roller-Raceway) | 11.3 |
G2 - Heat Generation Factor (Rib-Roller End) | 6.57 |
Cg - Geometry Factor | 0.070 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 23100-23256-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.