TIMKEN 26118-S-26283-B tapered bearings with Flange
Also known as : 26118-S-26283-B
- Inside Diameter: 30 mm
- Outside Diameter: 71.999 mm
- Width: 7.087 mm
- Basic dynamic load rating: 69.6 kN
- Basic static load rating: 60.1 kN
TIMKEN 26118-S-26283-B Bearing
TIMKEN 26118-S-26283-B Bearing details
Series | 26000 |
---|---|
model | 26118-S-26283-B |
Cone Part Number | 26118-S |
Cup Part Number | 26283-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.300 Kg 0.60 lb |
Dimensions | |
d - Bore |
30 mm 1.1811 in |
D - Cup Outer Diameter |
71.999 mm 2.8346 in |
D1 - Flange Outer Diameter |
75.857 mm 2.9865 in |
B - Cone Width |
18.923 mm 0.7450 in |
C - Cup Width |
15.875 mm 0.6250 in |
C1 - Cup Flange Width |
3.962 mm 0.1560 in |
T - Bearing Width to Flange |
7.087 mm 0.2790 in |
T1 - Bearing Width |
18.999 mm 0.7480 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1.5 mm 0.06 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
36.10 mm 1.42 in |
db - Cone Backface Backing Diameter |
38.10 mm 1.5 in |
Da - Cup Frontface Backing Diameter |
66.04 mm 2.62 in |
Ab - Cage-Cone Frontface Clearance |
2.3 mm 0.09 in |
Aa - Cage-Cone Backface Clearance |
0 mm 0 in |
a - Effective Center Location |
-4.1 mm -0.16 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
18100 N 4060 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
69600 N 15700 lbf |
C0 - Static Radial Rating |
60100 N 13500 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
11100 N 2500 lbf |
Factors | |
K - Factor | 1.62 |
e - ISO Factor | 0.36 |
Y - ISO Factor | 1.67 |
G1 - Heat Generation Factor (Roller-Raceway) | 16.1 |
G2 - Heat Generation Factor (Rib-Roller End) | 10.1 |
Cg - Geometry Factor | 0.063 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 26118-S-26283-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.