TIMKEN 26882-26822-B tapered bearings with Flange
Also known as : 26882-26822-B
- Inside Diameter: 41.275 mm
- Outside Diameter: 79.375 mm
- Width: 8.732 mm
- Basic dynamic load rating: 91.1 kN
- Basic static load rating: 110 kN
TIMKEN 26882-26822-B Bearing
TIMKEN 26882-26822-B Bearing details
Series | 26800 |
---|---|
model | 26882-26822-B |
Cone Part Number | 26882 |
Cup Part Number | 26822-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.000 Kg 2.20 lb |
Dimensions | |
d - Bore |
41.275 mm 1.6250 in |
D - Cup Outer Diameter |
79.375 mm 3.1250 in |
D1 - Flange Outer Diameter |
83.241 mm 3.2772 in |
B - Cone Width |
25.400 mm 1.0000 in |
C - Cup Width |
19.050 mm 0.7500 in |
C1 - Cup Flange Width |
3.970 mm 0.1563 in |
T - Bearing Width to Flange |
8.732 mm 0.3438 in |
T1 - Bearing Width |
23.813 mm 0.9375 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
da - Cone Frontface Backing Diameter |
47 mm 1.85 in |
db - Cone Backface Backing Diameter |
54.10 mm 2.13 in |
Da - Cup Frontface Backing Diameter |
75.95 mm 3.03 in |
Ab - Cage-Cone Frontface Clearance |
1.8 mm 0.07 in |
Aa - Cage-Cone Backface Clearance |
1 mm 0.04 in |
a - Effective Center Location |
-7.4 mm -0.29 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
23600 N 5310 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
91100 N 20500 lbf |
C0 - Static Radial Rating |
110000 N 24800 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
12900 N 2900 lbf |
Factors | |
K - Factor | 1.83 |
e - ISO Factor | 0.32 |
Y - ISO Factor | 1.88 |
G1 - Heat Generation Factor (Roller-Raceway) | 32.8 |
G2 - Heat Generation Factor (Rib-Roller End) | 13.3 |
Cg - Geometry Factor | 0.077 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 26882-26822-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.