TIMKEN 3196-3120-B tapered bearings with Flange
Also known as : 3196-3120-B
- Inside Diameter: 33.338 mm
- Outside Diameter: 72.626 mm
- Width: 11.113 mm
- Basic dynamic load rating: 94.8 kN
- Basic static load rating: 102 kN
TIMKEN 3196-3120-B Bearing
TIMKEN 3196-3120-B Bearing details
| Series | 3100 |
|---|---|
| model | 3196-3120-B |
| Cone Part Number | 3196 |
| Cup Part Number | 3120-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
0.400 Kg 1.00 lb |
| Dimensions | |
| d - Bore |
33.338 mm 1.3125 in |
| D - Cup Outer Diameter |
72.626 mm 2.8593 in |
| D1 - Flange Outer Diameter |
77.300 mm 3.0433 in |
| B - Cone Width |
29.997 mm 1.1810 in |
| C - Cup Width |
23.813 mm 0.9375 in |
| C1 - Cup Flange Width |
4.763 mm 0.1875 in |
| T - Bearing Width to Flange |
11.113 mm 0.4375 in |
| T1 - Bearing Width |
30.163 mm 1.1875 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
40.40 mm 1.59 in |
| db - Cone Backface Backing Diameter |
47 mm 1.85 in |
| Da - Cup Frontface Backing Diameter |
69.60 mm 2.74 in |
| Ab - Cage-Cone Frontface Clearance |
1.5 mm 0.06 in |
| Aa - Cage-Cone Backface Clearance |
0.8 mm 0.03 in |
| a - Effective Center Location |
-10.2 mm -0.4 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
24600 N 5520 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
94800 N 21300 lbf |
| C0 - Static Radial Rating |
102000 N 22800 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
14000 N 3140 lbf |
| Factors | |
| K - Factor | 1.76 |
| e - ISO Factor | 0.33 |
| Y - ISO Factor | 1.8 |
| G1 - Heat Generation Factor (Roller-Raceway) | 23.4 |
| G2 - Heat Generation Factor (Rib-Roller End) | 8.76 |
| Cg - Geometry Factor | 0.0697 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3196-3120-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
