TIMKEN 33287-33462-B Bearing

TIMKEN 33287-33462-B tapered bearings with Flange

Also known as : 33287-33462-B

• Inside Diameter: 73.025 mm
• Outside Diameter: 117.475 mm
• Width: 11.113 mm
• Basic dynamic load rating: 138 kN
• Basic static load rating: 197 kN

Inquire Now

TIMKEN 33287-33462-B Bearing

Series	33000
model	33287-33462-B
Cone Part Number	33287
Cup Part Number	33462-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.900 Kg 2.00 lb
Dimensions
d - Bore	73.025 mm 2.8750 in
D - Cup Outer Diameter	117.475 mm 4.6250 in
D1 - Flange Outer Diameter	122.133 mm 4.8084 in
B - Cone Width	30.163 mm 1.1875 in
C - Cup Width	23.813 mm 0.9375 in
C1 - Cup Flange Width	4.763 mm 0.1875 in
T - Bearing Width to Flange	11.113 mm 0.4375 in
T1 - Bearing Width	30.163 mm 1.1875 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.600 mm 0.14 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	81 mm 3.19 in
db - Cone Backface Backing Diameter	87.90 mm 3.46 in
Da - Cup Frontface Backing Diameter	114.05 mm 4.53 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	1.8 mm 0.07 in
a - Effective Center Location	-2.8 mm -0.11 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	35900 N 8060 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	138000 N 31100 lbf
C0 - Static Radial Rating	197000 N 44300 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	26800 N 6020 lbf
Factors
K - Factor	1.34
e - ISO Factor	0.44
Y - ISO Factor	1.38
G1 - Heat Generation Factor (Roller-Raceway)	84.2
G2 - Heat Generation Factor (Rib-Roller End)	24.4
Cg - Geometry Factor	0.116

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 33287-33462-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.