TIMKEN 3581-3525-B tapered bearings with Flange
Also known as : 3581-3525-B
- Inside Diameter: 34.925 mm
- Outside Diameter: 87.313 mm
- Width: 11.113 mm
- Basic dynamic load rating: 113 kN
- Basic static load rating: 134 kN
TIMKEN 3581-3525-B Bearing
TIMKEN 3581-3525-B Bearing details
Series | 3500 |
---|---|
model | 3581-3525-B |
Cone Part Number | 3581 |
Cup Part Number | 3525-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.600 Kg 3.60 lb |
Dimensions | |
d - Bore |
34.925 mm 1.3750 in |
D - Cup Outer Diameter |
87.313 mm 3.4375 in |
D1 - Flange Outer Diameter |
91.986 mm 3.6215 in |
B - Cone Width |
30.886 mm 1.2160 in |
C - Cup Width |
23.813 mm 0.9375 in |
C1 - Cup Flange Width |
4.750 mm 0.1870 in |
T - Bearing Width to Flange |
11.113 mm 0.4375 in |
T1 - Bearing Width |
30.175 mm 1.1880 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
42.90 mm 1.69 in |
db - Cone Backface Backing Diameter |
49.5 mm 1.95 in |
Da - Cup Frontface Backing Diameter |
82.04 mm 3.27 in |
Ab - Cage-Cone Frontface Clearance |
1.3 mm 0.05 in |
Aa - Cage-Cone Backface Clearance |
1.8 mm 0.07 in |
a - Effective Center Location |
-10.2 mm -0.4 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
29400 N 6610 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
113000 N 25500 lbf |
C0 - Static Radial Rating |
134000 N 30100 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
15400 N 3460 lbf |
Factors | |
K - Factor | 1.91 |
e - ISO Factor | 0.31 |
Y - ISO Factor | 1.96 |
G1 - Heat Generation Factor (Roller-Raceway) | 39.5 |
G2 - Heat Generation Factor (Rib-Roller End) | 10.5 |
Cg - Geometry Factor | 0.0808 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3581-3525-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.