TIMKEN 3660-3620-B tapered bearings with Flange
Also known as : 3660-3620-B
- Inside Diameter: 20.638 mm
- Outside Diameter: 61.913 mm
- Width: 9.525 mm
- Basic dynamic load rating: 88600 kN
- Basic static load rating: 89800 kN
TIMKEN 3660-3620-B Bearing
TIMKEN 3660-3620-B Bearing details
Series | 3600 |
---|---|
model | 3660-3620-B |
Cone Part Number | 3660 |
Cup Part Number | 3620-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight | 0.500 Kg 1.10 lb |
Dimensions | |
d - Bore | 20.638 mm 0.8125 in |
D - Cup Outer Diameter | 61.913 mm 2.4375 in |
D1 - Flange Outer Diameter | 66.571 mm 2.6209 in |
B - Cone Width | 30.417 mm 1.1975 in |
C - Cup Width | 23.813 mm 0.9375 in |
C1 - Cup Flange Width | 4.763 mm 0.1875 in |
T - Bearing Width to Flange | 9.525 mm 0.3750 in |
T1 - Bearing Width | 28.575 mm 1.1250 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius | 2.300 mm 0.090 in |
r - Cup Backface "To Clear" Radius | 3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter | 29.5 mm 1.16 in |
db - Cone Backface Backing Diameter | 33.5 mm 1.32 in |
Da - Cup Frontface Backing Diameter | 58.93 mm 2.34 in |
Ab - Cage-Cone Frontface Clearance | 1 mm 0.04 in |
Aa - Cage-Cone Backface Clearance | 1.3 mm 0.05 in |
a - Effective Center Location | -11.9 mm -0.47 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) | 23000 N 5160 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) | 88600 N 19900 lbf |
C0 - Static Radial Rating | 89800 N 20200 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) | 11100 N 2500 lbf |
Factors | |
K - Factor | 2.07 |
e - ISO Factor | 0.28 |
Y - ISO Factor | 2.13 |
G1 - Heat Generation Factor (Roller-Raceway) | 17 |
G2 - Heat Generation Factor (Rib-Roller End) | 6.38 |
Cg - Geometry Factor | 0.0592 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3660-3620-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.