TIMKEN 37431-37625-B tapered bearings with Flange
Also known as : 37431-37625-B
- Inside Diameter: 109.538 mm
- Outside Diameter: 158.75 mm
- Width: 11.908 mm
- Basic dynamic load rating: 115 kN
- Basic static load rating: 179 kN
TIMKEN 37431-37625-B Bearing
TIMKEN 37431-37625-B Bearing details
Series | 37000 |
---|---|
model | 37431-37625-B |
Cone Part Number | 37431 |
Cup Part Number | 37625-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.400 Kg 3.10 lb |
Dimensions | |
d - Bore |
109.538 mm 4.3125 in |
D - Cup Outer Diameter |
158.750 mm 6.2500 in |
D1 - Flange Outer Diameter |
163.413 mm 6.4336 in |
B - Cone Width |
21.438 mm 0.8440 in |
C - Cup Width |
15.875 mm 0.6250 in |
C1 - Cup Flange Width |
4.763 mm 0.1875 in |
T - Bearing Width to Flange |
11.908 mm 0.4688 in |
T1 - Bearing Width |
23.020 mm 0.9063 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
116.10 mm 4.57 in |
db - Cone Backface Backing Diameter |
122.9 mm 4.84 in |
Da - Cup Frontface Backing Diameter |
152.91 mm 6.03 in |
Ab - Cage-Cone Frontface Clearance |
3.8 mm 0.15 in |
Aa - Cage-Cone Backface Clearance |
2 mm 0.08 in |
a - Effective Center Location |
13.7 mm 0.54 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
29900 N 6710 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
115000 N 25900 lbf |
C0 - Static Radial Rating |
179000 N 40100 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
31000 N 6960 lbf |
Factors | |
K - Factor | 0.96 |
e - ISO Factor | 0.61 |
Y - ISO Factor | 0.99 |
G1 - Heat Generation Factor (Roller-Raceway) | 124 |
G2 - Heat Generation Factor (Rib-Roller End) | 48.7 |
Cg - Geometry Factor | 0.144 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 37431-37625-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.