TIMKEN 385-382-B Bearing

TIMKEN 385-382-B tapered bearings with Flange

Also known as : 385-382-B

• Inside Diameter: 55.001 mm
• Outside Diameter: 96.838 mm
• Width: 7.938 mm
• Basic dynamic load rating: 108 kN
• Basic static load rating: 107 kN

Inquire Now

TIMKEN 385-382-B Bearing

Series	385
model	385-382-B
Cone Part Number	385
Cup Part Number	382-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.700 Kg 1.50 lb
Dimensions
d - Bore	55.001 mm 2.1654 in
D - Cup Outer Diameter	96.838 mm 3.8125 in
D1 - Flange Outer Diameter	101.498 mm 3.9960 in
B - Cone Width	21.946 mm 0.8640 in
C - Cup Width	17.826 mm 0.7018 in
C1 - Cup Flange Width	4.763 mm 0.1875 in
T - Bearing Width to Flange	7.938 mm 0.3125 in
T1 - Bearing Width	21.001 mm 0.8268 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.300 mm 0.090 in
r - Cup Backface "To Clear" Radius	0.80 mm 0.030 in
da - Cone Frontface Backing Diameter	61 mm 2.4 in
db - Cone Backface Backing Diameter	65 mm 2.56 in
Da - Cup Frontface Backing Diameter	95.00 mm 3.74 in
Ab - Cage-Cone Frontface Clearance	2.8 mm 0.11 in
Aa - Cage-Cone Backface Clearance	0.8 mm 0.03 in
a - Effective Center Location	-3 mm -0.12 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	28000 N 6280 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	108000 N 24200 lbf
C0 - Static Radial Rating	107000 N 24100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	16900 N 3810 lbf
Factors
K - Factor	1.65
e - ISO Factor	0.35
Y - ISO Factor	1.69
G1 - Heat Generation Factor (Roller-Raceway)	42
G2 - Heat Generation Factor (Rib-Roller End)	15.7
Cg - Geometry Factor	0.0859

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 385-382-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.