TIMKEN 389-382-B tapered bearings with Flange
Also known as : 389-382-B
- Inside Diameter: 55.575 mm
- Outside Diameter: 96.838 mm
- Width: 7.938 mm
- Basic dynamic load rating: 108 kN
- Basic static load rating: 107 kN
TIMKEN 389-382-B Bearing
TIMKEN 389-382-B Bearing details
Series | 385 |
---|---|
model | 389-382-B |
Cone Part Number | 389 |
Cup Part Number | 382-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.700 Kg 1.40 lb |
Dimensions | |
d - Bore |
55.575 mm 2.1880 in |
D - Cup Outer Diameter |
96.838 mm 3.8125 in |
D1 - Flange Outer Diameter |
101.498 mm 3.9960 in |
B - Cone Width |
21.946 mm 0.8640 in |
C - Cup Width |
17.826 mm 0.7018 in |
C1 - Cup Flange Width |
4.763 mm 0.1875 in |
T - Bearing Width to Flange |
7.938 mm 0.3125 in |
T1 - Bearing Width |
21.001 mm 0.8268 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
2.300 mm 0.090 in |
r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
da - Cone Frontface Backing Diameter |
61 mm 2.4 in |
db - Cone Backface Backing Diameter |
65 mm 2.56 in |
Da - Cup Frontface Backing Diameter |
95.00 mm 3.74 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
0.8 mm 0.03 in |
a - Effective Center Location |
-3 mm -0.12 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
28000 N 6280 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
108000 N 24200 lbf |
C0 - Static Radial Rating |
107000 N 24100 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
16900 N 3810 lbf |
Factors | |
K - Factor | 1.65 |
e - ISO Factor | 0.35 |
Y - ISO Factor | 1.69 |
G1 - Heat Generation Factor (Roller-Raceway) | 42 |
G2 - Heat Generation Factor (Rib-Roller End) | 15.7 |
Cg - Geometry Factor | 0.0859 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 389-382-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.