TIMKEN 392-394AB tapered bearings with Flange
Also known as : 392-394AB
- Inside Diameter: 61.913 mm
- Outside Diameter: 110 mm
- Width: 7.925 mm
- Basic dynamic load rating: 98.9 kN
- Basic static load rating: 125 kN
TIMKEN 392-394AB Bearing
TIMKEN 392-394AB Bearing details
Series | 395 |
---|---|
model | 392-394AB |
Cone Part Number | 392 |
Cup Part Number | 394AB |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.900 Kg 2.00 lb |
Dimensions | |
d - Bore |
61.913 mm 2.4375 in |
D - Cup Outer Diameter |
110.000 mm 4.3307 in |
D1 - Flange Outer Diameter |
114.673 mm 4.5147 in |
B - Cone Width |
21.996 mm 0.8660 in |
C - Cup Width |
18.824 mm 0.7411 in |
C1 - Cup Flange Width |
4.750 mm 0.1870 in |
T - Bearing Width to Flange |
7.925 mm 0.3120 in |
T1 - Bearing Width |
21.999 mm 0.8661 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
0.800 mm 0.03 in |
r - Cup Backface "To Clear" Radius |
1.30 mm 0.050 in |
da - Cone Frontface Backing Diameter |
69.10 mm 2.72 in |
db - Cone Backface Backing Diameter |
70.1 mm 2.76 in |
Da - Cup Frontface Backing Diameter |
105.92 mm 4.18 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
1.3 mm 0.05 in |
a - Effective Center Location |
-0.8 mm -0.03 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
25600 N 5760 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
98900 N 22200 lbf |
C0 - Static Radial Rating |
125000 N 28100 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
17600 N 3970 lbf |
Factors | |
K - Factor | 1.45 |
e - ISO Factor | 0.40 |
Y - ISO Factor | 1.49 |
G1 - Heat Generation Factor (Roller-Raceway) | |
G2 - Heat Generation Factor (Rib-Roller End) | |
Cg - Geometry Factor | 0.0984 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 392-394AB bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.