TIMKEN 39590-39520-B tapered bearings with Flange
Also known as : 39590-39520-B
- Inside Diameter: 66.675 mm
- Outside Diameter: 112.713 mm
- Width: 11.908 mm
- Basic dynamic load rating: 167 kN
- Basic static load rating: 224 kN
TIMKEN 39590-39520-B Bearing
TIMKEN 39590-39520-B Bearing details
Series | 39500 |
---|---|
model | 39590-39520-B |
Cone Part Number | 39590 |
Cup Part Number | 39520-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.200 Kg 2.70 lb |
Dimensions | |
d - Bore |
66.675 mm 2.6250 in |
D - Cup Outer Diameter |
112.713 mm 4.4375 in |
D1 - Flange Outer Diameter |
118.168 mm 4.6523 in |
B - Cone Width |
30.163 mm 1.1875 in |
C - Cup Width |
23.813 mm 0.9375 in |
C1 - Cup Flange Width |
5.558 mm 0.2188 in |
T - Bearing Width to Flange |
11.908 mm 0.4688 in |
T1 - Bearing Width |
30.165 mm 1.1876 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
74.90 mm 2.95 in |
db - Cone Backface Backing Diameter |
82 mm 3.23 in |
Da - Cup Frontface Backing Diameter |
110.49 mm 4.35 in |
Ab - Cage-Cone Frontface Clearance |
3.3 mm 0.13 in |
Aa - Cage-Cone Backface Clearance |
1.3 mm 0.05 in |
a - Effective Center Location |
-6.6 mm -0.26 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
43300 N 9730 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
167000 N 37500 lbf |
C0 - Static Radial Rating |
224000 N 50300 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
25100 N 5650 lbf |
Factors | |
K - Factor | 1.72 |
e - ISO Factor | 0.34 |
Y - ISO Factor | 1.77 |
G1 - Heat Generation Factor (Roller-Raceway) | 84.3 |
G2 - Heat Generation Factor (Rib-Roller End) | 23.7 |
Cg - Geometry Factor | 0.107 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 39590-39520-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.