TIMKEN 42362-42587-B tapered bearings with Flange
Also known as : 42362-42587-B
- Inside Diameter: 92.075 mm
- Outside Diameter: 149.225 mm
- Width: 12.7 mm
- Basic dynamic load rating: 163 kN
- Basic static load rating: 241 kN
TIMKEN 42362-42587-B Bearing
TIMKEN 42362-42587-B Bearing details
Series | 42000 |
---|---|
model | 42362-42587-B |
Cone Part Number | 42362 |
Cup Part Number | 42587-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
2.000 Kg 4.50 lb |
Dimensions | |
d - Bore |
92.075 mm 3.6250 in |
D - Cup Outer Diameter |
149.225 mm 5.8750 in |
D1 - Flange Outer Diameter |
154.681 mm 6.0898 in |
B - Cone Width |
28.971 mm 1.1406 in |
C - Cup Width |
24.608 mm 0.9688 in |
C1 - Cup Flange Width |
5.558 mm 0.2188 in |
T - Bearing Width to Flange |
12.700 mm 0.5000 in |
T1 - Bearing Width |
31.750 mm 1.2500 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
101.10 mm 3.98 in |
db - Cone Backface Backing Diameter |
106.90 mm 4.21 in |
Da - Cup Frontface Backing Diameter |
152.40 mm 6.00 in |
Ab - Cage-Cone Frontface Clearance |
3.6 mm 0.14 in |
Aa - Cage-Cone Backface Clearance |
2.5 mm 0.1 in |
a - Effective Center Location |
3 mm 0.12 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
42200 N 9490 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
163000 N 36600 lbf |
C0 - Static Radial Rating |
241000 N 54300 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
35600 N 8000 lbf |
Factors | |
K - Factor | 1.19 |
e - ISO Factor | 0.49 |
Y - ISO Factor | 1.22 |
G1 - Heat Generation Factor (Roller-Raceway) | 130 |
G2 - Heat Generation Factor (Rib-Roller End) | 37.2 |
Cg - Geometry Factor | 0.139 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 42362-42587-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.