TIMKEN 42368-42587-B Bearing

TIMKEN 42368-42587-B tapered bearings with Flange

Also known as : 42368-42587-B

• Inside Diameter: 93.663 mm
• Outside Diameter: 149.225 mm
• Width: 12.7 mm
• Basic dynamic load rating: 193 kN
• Basic static load rating: 241 kN

Inquire Now

TIMKEN 42368-42587-B Bearing

Series	42000
model	42368-42587-B
Cone Part Number	42368
Cup Part Number	42587-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	2.000 Kg 4.40 lb
Dimensions
d - Bore	93.663 mm 3.6875 in
D - Cup Outer Diameter	149.225 mm 5.8750 in
D1 - Flange Outer Diameter	154.681 mm 6.0898 in
B - Cone Width	28.971 mm 1.1406 in
C - Cup Width	24.608 mm 0.9688 in
C1 - Cup Flange Width	5.558 mm 0.2188 in
T - Bearing Width to Flange	12.700 mm 0.5000 in
T1 - Bearing Width	31.750 mm 1.2500 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3 mm 0.12 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	102.10 mm 4.02 in
db - Cone Backface Backing Diameter	106.90 mm 4.21 in
Da - Cup Frontface Backing Diameter	152.40 mm 6.00 in
Ab - Cage-Cone Frontface Clearance	3.6 mm 0.14 in
Aa - Cage-Cone Backface Clearance	2.5 mm 0.1 in
a - Effective Center Location	3 mm 0.12 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	50100 N 11300 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	193000 N 43400 lbf
C0 - Static Radial Rating	241000 N 54300 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	42200 N 9480 lbf
Factors
K - Factor	1.19
e - ISO Factor	0.49
Y - ISO Factor	1.22
G1 - Heat Generation Factor (Roller-Raceway)	130
G2 - Heat Generation Factor (Rib-Roller End)	37.2
Cg - Geometry Factor	0.139

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 42368-42587-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.