TIMKEN 455-453XB tapered bearings with Flange
Also known as : 455-453XB
- Inside Diameter: 50.8 mm
- Outside Diameter: 107.95 mm
- Width: 8.738 mm
- Basic dynamic load rating: 161 kN
- Basic static load rating: 166 kN
TIMKEN 455-453XB Bearing
TIMKEN 455-453XB Bearing details
Series | 455 |
---|---|
model | 455-453XB |
Cone Part Number | 455 |
Cup Part Number | 453XB |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.300 Kg 2.90 lb |
Dimensions | |
d - Bore |
50.8 mm 2 in |
D - Cup Outer Diameter |
107.95 mm 4.25 in |
D1 - Flange Outer Diameter |
114.198 mm 4.4960 in |
B - Cone Width |
29.317 mm 1.1542 in |
C - Cup Width |
24.605 mm 0.9687 in |
C1 - Cup Flange Width |
5.558 mm 0.2188 in |
T - Bearing Width to Flange |
8.738 mm 0.3440 in |
T1 - Bearing Width |
27.785 mm 1.0939 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
0.800 mm 0.03 in |
r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
da - Cone Frontface Backing Diameter |
58.90 mm 2.32 in |
db - Cone Backface Backing Diameter |
59.90 mm 2.36 in |
Da - Cup Frontface Backing Diameter |
100.58 mm 3.96 in |
Ab - Cage-Cone Frontface Clearance |
2 mm 0.08 in |
Aa - Cage-Cone Backface Clearance |
1.8 mm 0.07 in |
a - Effective Center Location |
-7.1 mm -0.28 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
41700 N 9370 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
161000 N 36100 lbf |
C0 - Static Radial Rating |
166000 N 37200 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
23900 N 5380 lbf |
Factors | |
K - Factor | 1.74 |
e - ISO Factor | 0.34 |
Y - ISO Factor | 1.79 |
G1 - Heat Generation Factor (Roller-Raceway) | 58.6 |
G2 - Heat Generation Factor (Rib-Roller End) | 17.1 |
Cg - Geometry Factor | 0.0946 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 455-453XB bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.