TIMKEN 46790-46720-B tapered bearings with Flange
Also known as : 46790-46720-B
- Inside Diameter: 165.1 mm
- Outside Diameter: 225.425 mm
- Width: 13.495 mm
- Basic dynamic load rating: 303 kN
- Basic static load rating: 635 kN
TIMKEN 46790-46720-B Bearing
TIMKEN 46790-46720-B Bearing details
| Series | 46700 |
|---|---|
| model | 46790-46720-B |
| Cone Part Number | 46790 |
| Cup Part Number | 46720-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
4.70 Kg 10.300 lb |
| Dimensions | |
| d - Bore |
165.1 mm 6.5 in |
| D - Cup Outer Diameter |
225.425 mm 8.875 in |
| D1 - Flange Outer Diameter |
230.881 mm 9.0898 in |
| B - Cone Width |
39.688 mm 1.5625 in |
| C - Cup Width |
33.338 mm 1.3125 in |
| C1 - Cup Flange Width |
5.558 mm 0.2188 in |
| T - Bearing Width to Flange |
13.495 mm 0.5313 in |
| T1 - Bearing Width |
41.275 mm 1.6250 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
174 mm 6.85 in |
| db - Cone Backface Backing Diameter |
181.1 mm 7.13 in |
| Da - Cup Frontface Backing Diameter |
218.95 mm 8.63 in |
| Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
| Aa - Cage-Cone Backface Clearance |
3.3 mm 0.13 in |
| a - Effective Center Location |
2.5 mm 0.1 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
78600 N 17700 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
303000 N 68200 lbf |
| C0 - Static Radial Rating |
635000 N 143000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
51600 N 11600 lbf |
| Factors | |
| K - Factor | 1.52 |
| e - ISO Factor | 0.38 |
| Y - ISO Factor | 1.57 |
| G1 - Heat Generation Factor (Roller-Raceway) | 572 |
| G2 - Heat Generation Factor (Rib-Roller End) | 175 |
| Cg - Geometry Factor | 0.143 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 46790-46720-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
