TIMKEN 46792-46720-B tapered bearings with Flange
Also known as : 46792-46720-B
- Inside Diameter: 166.688 mm
- Outside Diameter: 225.425 mm
- Width: 13.495 mm
- Basic dynamic load rating: 303 kN
- Basic static load rating: 635 kN
TIMKEN 46792-46720-B Bearing
TIMKEN 46792-46720-B Bearing details
Series | 46700 |
---|---|
model | 46792-46720-B |
Cone Part Number | 46792 |
Cup Part Number | 46720-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
4.60 Kg 10.100 lb |
Dimensions | |
d - Bore |
166.688 mm 6.5625 in |
D - Cup Outer Diameter |
225.425 mm 8.875 in |
D1 - Flange Outer Diameter |
230.881 mm 9.0898 in |
B - Cone Width |
39.688 mm 1.5625 in |
C - Cup Width |
33.338 mm 1.3125 in |
C1 - Cup Flange Width |
5.558 mm 0.2188 in |
T - Bearing Width to Flange |
13.495 mm 0.5313 in |
T1 - Bearing Width |
41.275 mm 1.6250 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
175 mm 6.89 in |
db - Cone Backface Backing Diameter |
182.10 mm 7.17 in |
Da - Cup Frontface Backing Diameter |
218.95 mm 8.63 in |
Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
Aa - Cage-Cone Backface Clearance |
3.3 mm 0.13 in |
a - Effective Center Location |
2.5 mm 0.1 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
78600 N 17700 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
303000 N 68200 lbf |
C0 - Static Radial Rating |
635000 N 143000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
51600 N 11600 lbf |
Factors | |
K - Factor | 1.52 |
e - ISO Factor | 0.38 |
Y - ISO Factor | 1.57 |
G1 - Heat Generation Factor (Roller-Raceway) | 572 |
G2 - Heat Generation Factor (Rib-Roller End) | 154 |
Cg - Geometry Factor | 0.143 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 46792-46720-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.