TIMKEN 47686-47620-B tapered bearings with Flange
Also known as : 47686-47620-B
- Inside Diameter: 82.55 mm
- Outside Diameter: 133.35 mm
- Width: 12.7 mm
- Basic dynamic load rating: 214 kN
- Basic static load rating: 262 kN
TIMKEN 47686-47620-B Bearing
TIMKEN 47686-47620-B Bearing details
| Series | 47600 |
|---|---|
| model | 47686-47620-B |
| Cone Part Number | 47686 |
| Cup Part Number | 47620-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
1.900 Kg 4.10 lb |
| Dimensions | |
| d - Bore |
82.550 mm 3.2500 in |
| D - Cup Outer Diameter |
133.350 mm 5.2500 in |
| D1 - Flange Outer Diameter |
138.811 mm 5.4650 in |
| B - Cone Width |
33.338 mm 1.3125 in |
| C - Cup Width |
26.195 mm 1.0313 in |
| C1 - Cup Flange Width |
5.558 mm 0.2188 in |
| T - Bearing Width to Flange |
12.700 mm 0.5000 in |
| T1 - Bearing Width |
33.338 mm 1.3125 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
91.90 mm 3.62 in |
| db - Cone Backface Backing Diameter |
98 mm 3.86 in |
| Da - Cup Frontface Backing Diameter |
130.05 mm 5.16 in |
| Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
| Aa - Cage-Cone Backface Clearance |
2 mm 0.08 in |
| a - Effective Center Location |
-4.3 mm -0.17 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
55500 N 12500 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
214000 N 48100 lbf |
| C0 - Static Radial Rating |
262000 N 58900 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
38400 N 8640 lbf |
| Factors | |
| K - Factor | 1.44 |
| e - ISO Factor | 0.40 |
| Y - ISO Factor | 1.48 |
| G1 - Heat Generation Factor (Roller-Raceway) | 119 |
| G2 - Heat Generation Factor (Rib-Roller End) | 29.2 |
| Cg - Geometry Factor | 0.127 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 47686-47620-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
