TIMKEN 477-472-B tapered bearings with Flange
Also known as : 477-472-B
- Inside Diameter: 63.5 mm
- Outside Diameter: 120 mm
- Width: 11.095 mm
- Basic dynamic load rating: 143 kN
- Basic static load rating: 186 kN
TIMKEN 477-472-B Bearing
TIMKEN 477-472-B Bearing details
Series | 475 |
---|---|
model | 477-472-B |
Cone Part Number | 477 |
Cup Part Number | 472-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.500 Kg 3.30 lb |
Dimensions | |
d - Bore |
63.500 mm 2.5000 in |
D - Cup Outer Diameter |
120.000 mm 4.7244 in |
D1 - Flange Outer Diameter |
125.435 mm 4.9384 in |
B - Cone Width |
29.007 mm 1.1420 in |
C - Cup Width |
24.237 mm 0.9542 in |
C1 - Cup Flange Width |
5.537 mm 0.2180 in |
T - Bearing Width to Flange |
11.095 mm 0.4368 in |
T1 - Bearing Width |
29.794 mm 1.1730 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
0.800 mm 0.03 in |
r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
da - Cone Frontface Backing Diameter |
71.90 mm 2.83 in |
db - Cone Backface Backing Diameter |
72.90 mm 2.87 in |
Da - Cup Frontface Backing Diameter |
115.82 mm 4.56 in |
Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
Aa - Cage-Cone Backface Clearance |
1 mm 0.04 in |
a - Effective Center Location |
-4.1 mm -0.16 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
37200 N 8360 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
143000 N 32200 lbf |
C0 - Static Radial Rating |
186000 N 41900 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
24500 N 5500 lbf |
Factors | |
K - Factor | 1.52 |
e - ISO Factor | 0.38 |
Y - ISO Factor | 1.56 |
G1 - Heat Generation Factor (Roller-Raceway) | 77.2 |
G2 - Heat Generation Factor (Rib-Roller End) | 23 |
Cg - Geometry Factor | 0.108 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 477-472-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.