TIMKEN 47896-47825-B tapered bearings with Flange
Also known as : 47896-47825-B
- Inside Diameter: 95.25 mm
- Outside Diameter: 142.875 mm
- Width: 15.08 mm
- Basic dynamic load rating: 197 kN
- Basic static load rating: 307 kN
TIMKEN 47896-47825-B Bearing
TIMKEN 47896-47825-B Bearing details
Series | 47800 |
---|---|
model | 47896-47825-B |
Cone Part Number | 47896 |
Cup Part Number | 47825-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.900 Kg 4.10 lb |
Dimensions | |
d - Bore |
95.250 mm 3.7500 in |
D - Cup Outer Diameter |
142.875 mm 5.625 in |
D1 - Flange Outer Diameter |
149.123 mm 5.8710 in |
B - Cone Width |
34.925 mm 1.3750 in |
C - Cup Width |
26.195 mm 1.0313 in |
C1 - Cup Flange Width |
7.938 mm 0.3125 in |
T - Bearing Width to Flange |
15.080 mm 0.5937 in |
T1 - Bearing Width |
33.338 mm 1.3125 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
103.10 mm 4.06 in |
db - Cone Backface Backing Diameter |
110 mm 4.33 in |
Da - Cup Frontface Backing Diameter |
143.00 mm 5.63 in |
Ab - Cage-Cone Frontface Clearance |
0.8 mm 0.03 in |
Aa - Cage-Cone Backface Clearance |
2.3 mm 0.09 in |
a - Effective Center Location |
-1 mm -0.04 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
51100 N 11500 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
197000 N 44300 lbf |
C0 - Static Radial Rating |
307000 N 69000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
39200 N 8810 lbf |
Factors | |
K - Factor | 1.3 |
e - ISO Factor | 0.45 |
Y - ISO Factor | 1.34 |
G1 - Heat Generation Factor (Roller-Raceway) | 153 |
G2 - Heat Generation Factor (Rib-Roller End) | 38.1 |
Cg - Geometry Factor | 0.143 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 47896-47825-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.