TIMKEN 498-493-B tapered bearings with Flange
Also known as : 498-493-B
- Inside Diameter: 84.138 mm
- Outside Diameter: 136.525 mm
- Width: 13.475 mm
- Basic dynamic load rating: 154 kN
- Basic static load rating: 216 kN
TIMKEN 498-493-B Bearing
TIMKEN 498-493-B Bearing details
| Series | 495 |
|---|---|
| model | 498-493-B |
| Cone Part Number | 498 |
| Cup Part Number | 493-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
1.600 Kg 3.60 lb |
| Dimensions | |
| d - Bore |
84.138 mm 3.3125 in |
| D - Cup Outer Diameter |
136.525 mm 5.3750 in |
| D1 - Flange Outer Diameter |
141.961 mm 5.5890 in |
| B - Cone Width |
29.769 mm 1.1720 in |
| C - Cup Width |
22.225 mm 0.8750 in |
| C1 - Cup Flange Width |
5.537 mm 0.2180 in |
| T - Bearing Width to Flange |
13.475 mm 0.5305 in |
| T1 - Bearing Width |
30.163 mm 1.1875 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
90.90 mm 3.58 in |
| db - Cone Backface Backing Diameter |
98 mm 3.86 in |
| Da - Cup Frontface Backing Diameter |
131.83 mm 5.19 in |
| Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
| Aa - Cage-Cone Backface Clearance |
1.8 mm 0.07 in |
| a - Effective Center Location |
-0.8 mm -0.03 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
40000 N 9000 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
154000 N 34700 lbf |
| C0 - Static Radial Rating |
216000 N 48600 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
30500 N 6850 lbf |
| Factors | |
| K - Factor | 1.31 |
| e - ISO Factor | 0.44 |
| Y - ISO Factor | 1.35 |
| G1 - Heat Generation Factor (Roller-Raceway) | 105 |
| G2 - Heat Generation Factor (Rib-Roller End) | 29.3 |
| Cg - Geometry Factor | 0.125 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 498-493-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
