TIMKEN 52400-52618-B tapered bearings with Flange
Also known as : 52400-52618-B
- Inside Diameter: 101.6 mm
- Outside Diameter: 157.163 mm
- Width: 16.667 mm
- Basic dynamic load rating: 223 kN
- Basic static load rating: 343 kN
TIMKEN 52400-52618-B Bearing
TIMKEN 52400-52618-B Bearing details
Series | 52000 |
---|---|
model | 52400-52618-B |
Cone Part Number | 52400 |
Cup Part Number | 52618-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
2.500 Kg 5.40 lb |
Dimensions | |
d - Bore |
101.600 mm 4.0000 in |
D - Cup Outer Diameter |
157.163 mm 6.1875 in |
D1 - Flange Outer Diameter |
163.513 mm 6.4375 in |
B - Cone Width |
36.116 mm 1.4219 in |
C - Cup Width |
26.195 mm 1.0313 in |
C1 - Cup Flange Width |
6.350 mm 0.2500 in |
T - Bearing Width to Flange |
16.667 mm 0.6562 in |
T1 - Bearing Width |
36.513 mm 1.4375 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
111 mm 4.37 in |
db - Cone Backface Backing Diameter |
117.10 mm 4.61 in |
Da - Cup Frontface Backing Diameter |
154.94 mm 6.14 in |
Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
Aa - Cage-Cone Backface Clearance |
4.1 mm 0.16 in |
a - Effective Center Location |
-0.5 mm -0.02 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
57900 N 13000 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
223000 N 50200 lbf |
C0 - Static Radial Rating |
343000 N 77000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
47100 N 10600 lbf |
Factors | |
K - Factor | 1.23 |
e - ISO Factor | 0.47 |
Y - ISO Factor | 1.26 |
G1 - Heat Generation Factor (Roller-Raceway) | 175 |
G2 - Heat Generation Factor (Rib-Roller End) | 41.7 |
Cg - Geometry Factor | 0.152 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 52400-52618-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.