TIMKEN 53162-53387-B Bearing

TIMKEN 53162-53387-B tapered bearings with Flange

Also known as : 53162-53387-B

  • Inside Diameter: 41.275 mm
  • Outside Diameter: 98.425 mm
  • Width: 16.67 mm
  • Basic dynamic load rating: 119 kN
  • Basic static load rating: 104 kN

Inquire Now


TIMKEN 53162-53387-B Bearing

TIMKEN 53162-53387-B Bearing details

Series 53000
model 53162-53387-B
Cone Part Number 53162
Cup Part Number 53387-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.100 Kg
2.40 lb
Dimensions
d - Bore 41.275 mm
1.6250 in
D - Cup Outer Diameter 98.425 mm
3.8750 in
D1 - Flange Outer Diameter 104.673 mm
4.1210 in
B - Cone Width 28.301 mm
1.1142 in
C - Cup Width 20.638 mm
0.8125 in
C1 - Cup Flange Width 6.350 mm
0.2500 in
T - Bearing Width to Flange 16.670 mm
0.6563 in
T1 - Bearing Width 30.958 mm
1.2188 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.5 mm
0.06 in
r - Cup Backface "To Clear" Radius 0.80 mm
0.030 in
da - Cone Frontface Backing Diameter 52.60 mm
2.07 in
db - Cone Backface Backing Diameter 56.90 mm
2.24 in
Da - Cup Frontface Backing Diameter 91.95 mm
3.66 in
Ab - Cage-Cone Frontface Clearance 3 mm
0.12 in
Aa - Cage-Cone Backface Clearance 4.8 mm
0.19 in
a - Effective Center Location -0.3 mm
-0.01 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 30800 N
6920 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 119000 N
26700 lbf
C0 - Static Radial Rating 104000 N
23400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 39000 N
8760 lbf
Factors
K - Factor 0.79
e - ISO Factor 0.74
Y - ISO Factor 0.81
G1 - Heat Generation Factor (Roller-Raceway) 26.7
G2 - Heat Generation Factor (Rib-Roller End) 9.63
Cg - Geometry Factor 0.093

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 53162-53387-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.