TIMKEN 560-S-552-B tapered bearings with Flange
Also known as : 560-S-552-B
- Inside Diameter: 68.263 mm
- Outside Diameter: 123.825 mm
- Width: 14.288 mm
- Basic dynamic load rating: 191 kN
- Basic static load rating: 248 kN
TIMKEN 560-S-552-B Bearing
TIMKEN 560-S-552-B Bearing details
Series | 555 |
---|---|
model | 560-S-552-B |
Cone Part Number | 560-S |
Cup Part Number | 552-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.900 Kg 4.20 lb |
Dimensions | |
d - Bore |
68.263 mm 2.6875 in |
D - Cup Outer Diameter |
123.825 mm 4.8750 in |
D1 - Flange Outer Diameter |
130.073 mm 5.1210 in |
B - Cone Width |
36.678 mm 1.4440 in |
C - Cup Width |
30.163 mm 1.1875 in |
C1 - Cup Flange Width |
6.350 mm 0.2500 in |
T - Bearing Width to Flange |
14.288 mm 0.5625 in |
T1 - Bearing Width |
38.100 mm 1.5000 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
75.9 mm 2.99 in |
db - Cone Backface Backing Diameter |
83.10 mm 3.27 in |
Da - Cup Frontface Backing Diameter |
116.84 mm 4.60 in |
Ab - Cage-Cone Frontface Clearance |
2 mm 0.08 in |
Aa - Cage-Cone Backface Clearance |
1.8 mm 0.07 in |
a - Effective Center Location |
-9.4 mm -0.37 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
49400 N 11100 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
191000 N 42900 lbf |
C0 - Static Radial Rating |
248000 N 55700 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
29300 N 6590 lbf |
Factors | |
K - Factor | 1.69 |
e - ISO Factor | 0.35 |
Y - ISO Factor | 1.73 |
G1 - Heat Generation Factor (Roller-Raceway) | 91 |
G2 - Heat Generation Factor (Rib-Roller End) | 21.1 |
Cg - Geometry Factor | 0.111 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 560-S-552-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.