TIMKEN 565-563-B tapered bearings with Flange
Also known as : 565-563-B
- Inside Diameter: 63.5 mm
- Outside Diameter: 127 mm
- Width: 14.288 mm
- Basic dynamic load rating: 196 kN
- Basic static load rating: 262 kN
TIMKEN 565-563-B Bearing
TIMKEN 565-563-B Bearing details
| Series | 565 |
|---|---|
| model | 565-563-B |
| Cone Part Number | 565 |
| Cup Part Number | 563-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
2.200 Kg 4.80 lb |
| Dimensions | |
| d - Bore |
63.500 mm 2.5000 in |
| D - Cup Outer Diameter |
127 mm 5 in |
| D1 - Flange Outer Diameter |
133.248 mm 5.2460 in |
| B - Cone Width |
36.170 mm 1.4240 in |
| C - Cup Width |
28.575 mm 1.1250 in |
| C1 - Cup Flange Width |
6.350 mm 0.2500 in |
| T - Bearing Width to Flange |
14.288 mm 0.5625 in |
| T1 - Bearing Width |
36.513 mm 1.4375 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
72.9 mm 2.87 in |
| db - Cone Backface Backing Diameter |
80 mm 3.15 in |
| Da - Cup Frontface Backing Diameter |
121.90 mm 4.80 in |
| Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
| Aa - Cage-Cone Backface Clearance |
2.5 mm 0.1 in |
| a - Effective Center Location |
-8.1 mm -0.32 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
50900 N 11400 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
196000 N 44100 lbf |
| C0 - Static Radial Rating |
262000 N 58900 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
31700 N 7130 lbf |
| Factors | |
| K - Factor | 1.61 |
| e - ISO Factor | 0.36 |
| Y - ISO Factor | 1.65 |
| G1 - Heat Generation Factor (Roller-Raceway) | 101 |
| G2 - Heat Generation Factor (Rib-Roller End) | 24 |
| Cg - Geometry Factor | 0.117 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 565-563-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
