TIMKEN 567-563-B tapered bearings with Flange
Also known as : 567-563-B
- Inside Diameter: 73.025 mm
- Outside Diameter: 127 mm
- Width: 14.288 mm
- Basic dynamic load rating: 196 kN
- Basic static load rating: 262 kN
TIMKEN 567-563-B Bearing
TIMKEN 567-563-B Bearing details
Series | 565 |
---|---|
model | 567-563-B |
Cone Part Number | 567 |
Cup Part Number | 563-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
1.900 Kg 4.10 lb |
Dimensions | |
d - Bore |
73.025 mm 2.8750 in |
D - Cup Outer Diameter |
127 mm 5 in |
D1 - Flange Outer Diameter |
133.248 mm 5.2460 in |
B - Cone Width |
36.170 mm 1.4240 in |
C - Cup Width |
28.575 mm 1.1250 in |
C1 - Cup Flange Width |
6.350 mm 0.2500 in |
T - Bearing Width to Flange |
14.288 mm 0.5625 in |
T1 - Bearing Width |
36.513 mm 1.4375 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
81 mm 3.19 in |
db - Cone Backface Backing Diameter |
87.90 mm 3.46 in |
Da - Cup Frontface Backing Diameter |
121.90 mm 4.80 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
2.5 mm 0.1 in |
a - Effective Center Location |
-8.1 mm -0.32 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
50900 N 11400 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
196000 N 44100 lbf |
C0 - Static Radial Rating |
262000 N 58900 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
31700 N 7130 lbf |
Factors | |
K - Factor | 1.61 |
e - ISO Factor | 0.36 |
Y - ISO Factor | 1.65 |
G1 - Heat Generation Factor (Roller-Raceway) | 101 |
G2 - Heat Generation Factor (Rib-Roller End) | 24 |
Cg - Geometry Factor | 0.117 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 567-563-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.