TIMKEN 617-612-B tapered bearings with Flange
Also known as : 617-612-B
- Inside Diameter: 47.625 mm
- Outside Diameter: 120.65 mm
- Width: 16.574 mm
- Basic dynamic load rating: 207 kN
- Basic static load rating: 244 kN
TIMKEN 617-612-B Bearing
TIMKEN 617-612-B Bearing details
Series | 615 |
---|---|
model | 617-612-B |
Cone Part Number | 617 |
Cup Part Number | 612-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
2.400 Kg 5.30 lb |
Dimensions | |
d - Bore |
47.625 mm 1.8750 in |
D - Cup Outer Diameter |
120.650 mm 4.7500 in |
D1 - Flange Outer Diameter |
127.691 mm 5.0272 in |
B - Cone Width |
41.275 mm 1.6250 in |
C - Cup Width |
31.750 mm 1.2500 in |
C1 - Cup Flange Width |
7.142 mm 0.2812 in |
T - Bearing Width to Flange |
16.574 mm 0.6525 in |
T1 - Bearing Width |
41.181 mm 1.6213 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
57.90 mm 2.28 in |
db - Cone Backface Backing Diameter |
65 mm 2.56 in |
Da - Cup Frontface Backing Diameter |
110.49 mm 4.35 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
3.3 mm 0.13 in |
a - Effective Center Location |
-14 mm -0.55 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
53800 N 12100 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
207000 N 46600 lbf |
C0 - Static Radial Rating |
244000 N 54800 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
28900 N 6510 lbf |
Factors | |
K - Factor | 1.86 |
e - ISO Factor | 0.31 |
Y - ISO Factor | 1.91 |
G1 - Heat Generation Factor (Roller-Raceway) | 75.9 |
G2 - Heat Generation Factor (Rib-Roller End) | 16.2 |
Cg - Geometry Factor | 0.0694 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 617-612-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.