TIMKEN 64433-64700-B tapered bearings with Flange
Also known as : 64433-64700-B
- Inside Diameter: 109.992 mm
- Outside Diameter: 177.8 mm
- Width: 18.258 mm
- Basic dynamic load rating: 275 kN
- Basic static load rating: 419 kN
TIMKEN 64433-64700-B Bearing
TIMKEN 64433-64700-B Bearing details
| Series | 64000 |
|---|---|
| model | 64433-64700-B |
| Cone Part Number | 64433 |
| Cup Part Number | 64700-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
3.90 Kg 8.600 lb |
| Dimensions | |
| d - Bore |
109.992 mm 4.3304 in |
| D - Cup Outer Diameter |
177.800 mm 7.0000 in |
| D1 - Flange Outer Diameter |
184.841 mm 7.2772 in |
| B - Cone Width |
41.275 mm 1.6250 in |
| C - Cup Width |
30.163 mm 1.1875 in |
| C1 - Cup Flange Width |
7.145 mm 0.2813 in |
| T - Bearing Width to Flange |
18.258 mm 0.7188 in |
| T1 - Bearing Width |
41.275 mm 1.6250 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
120.90 mm 4.76 in |
| db - Cone Backface Backing Diameter |
128 mm 5.04 in |
| Da - Cup Frontface Backing Diameter |
174.24 mm 6.86 in |
| Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
| Aa - Cage-Cone Backface Clearance |
5.1 mm 0.2 in |
| a - Effective Center Location |
1.3 mm 0.05 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
71200 N 16000 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
275000 N 61800 lbf |
| C0 - Static Radial Rating |
419000 N 94200 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
62900 N 14100 lbf |
| Factors | |
| K - Factor | 1.13 |
| e - ISO Factor | 0.52 |
| Y - ISO Factor | 1.16 |
| G1 - Heat Generation Factor (Roller-Raceway) | 219 |
| G2 - Heat Generation Factor (Rib-Roller End) | 45.3 |
| Cg - Geometry Factor | 0.115 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 64433-64700-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
