TIMKEN 67790-67720-B tapered bearings with Flange
Also known as : 67790-67720-B
- Inside Diameter: 177.8 mm
- Outside Diameter: 247.65 mm
- Width: 16.67 mm
- Basic dynamic load rating: 405 kN
- Basic static load rating: 779 kN
TIMKEN 67790-67720-B Bearing
TIMKEN 67790-67720-B Bearing details
Series | 67700 |
---|---|
model | 67790-67720-B |
Cone Part Number | 67790 |
Cup Part Number | 67720-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
7.200 Kg 15.90 lb |
Dimensions | |
d - Bore |
177.800 mm 7.0000 in |
D - Cup Outer Diameter |
247.650 mm 9.7500 in |
D1 - Flange Outer Diameter |
254.691 mm 10.0272 in |
B - Cone Width |
47.625 mm 1.875 in |
C - Cup Width |
38.100 mm 1.5000 in |
C1 - Cup Flange Width |
7.145 mm 0.2813 in |
T - Bearing Width to Flange |
16.670 mm 0.6563 in |
T1 - Bearing Width |
47.625 mm 1.8750 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
188 mm 7.4 in |
db - Cone Backface Backing Diameter |
194.10 mm 7.64 in |
Da - Cup Frontface Backing Diameter |
241.80 mm 9.52 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
4.3 mm 0.17 in |
a - Effective Center Location |
4.8 mm 0.19 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
105000 N 23600 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
405000 N 91100 lbf |
C0 - Static Radial Rating |
779000 N 175000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
79000 N 17800 lbf |
Factors | |
K - Factor | 1.33 |
e - ISO Factor | 0.44 |
Y - ISO Factor | 1.36 |
G1 - Heat Generation Factor (Roller-Raceway) | 622 |
G2 - Heat Generation Factor (Rib-Roller End) | 122 |
Cg - Geometry Factor | 0.121 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 67790-67720-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.