TIMKEN 67885-67820-B tapered bearings with Flange
Also known as : 67885-67820-B
- Inside Diameter: 190.5 mm
- Outside Diameter: 266.7 mm
- Width: 16.67 mm
- Basic dynamic load rating: 416 kN
- Basic static load rating: 835 kN
TIMKEN 67885-67820-B Bearing
TIMKEN 67885-67820-B Bearing details
Series | 67800 |
---|---|
model | 67885-67820-B |
Cone Part Number | 67885 |
Cup Part Number | 67820-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
8.10 Kg 17.800 lb |
Dimensions | |
d - Bore |
190.5 mm 7.5 in |
D - Cup Outer Diameter |
266.7 mm 10.5 in |
D1 - Flange Outer Diameter |
273.741 mm 10.7772 in |
B - Cone Width |
46.833 mm 1.8438 in |
C - Cup Width |
38.100 mm 1.5000 in |
C1 - Cup Flange Width |
7.145 mm 0.2813 in |
T - Bearing Width to Flange |
16.670 mm 0.6563 in |
T1 - Bearing Width |
47.625 mm 1.8750 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
202.90 mm 7.99 in |
db - Cone Backface Backing Diameter |
209 mm 8.23 in |
Da - Cup Frontface Backing Diameter |
260.35 mm 10.25 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
4.6 mm 0.18 in |
a - Effective Center Location |
10.2 mm 0.4 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
108000 N 24300 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
416000 N 93600 lbf |
C0 - Static Radial Rating |
835000 N 188000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
88200 N 19800 lbf |
Factors | |
K - Factor | 1.22 |
e - ISO Factor | 0.48 |
Y - ISO Factor | 1.26 |
G1 - Heat Generation Factor (Roller-Raceway) | 728 |
G2 - Heat Generation Factor (Rib-Roller End) | 147 |
Cg - Geometry Factor | 0.131 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 67885-67820-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.