TIMKEN 74525-74850-B tapered bearings with Flange
Also known as : 74525-74850-B
- Inside Diameter: 133.35 mm
- Outside Diameter: 215.9 mm
- Width: 20.638 mm
- Basic dynamic load rating: 382 kN
- Basic static load rating: 614 kN
TIMKEN 74525-74850-B Bearing
TIMKEN 74525-74850-B Bearing details
Series | 74000 |
---|---|
model | 74525-74850-B |
Cone Part Number | 74525 |
Cup Part Number | 74850-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
6.600 Kg 14.60 lb |
Dimensions | |
d - Bore |
133.350 mm 5.2500 in |
D - Cup Outer Diameter |
215.900 mm 8.5000 in |
D1 - Flange Outer Diameter |
223.733 mm 8.8084 in |
B - Cone Width |
47.625 mm 1.875 in |
C - Cup Width |
34.925 mm 1.3750 in |
C1 - Cup Flange Width |
7.938 mm 0.3125 in |
T - Bearing Width to Flange |
20.638 mm 0.8125 in |
T1 - Bearing Width |
47.625 mm 1.8750 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
146.10 mm 5.75 in |
db - Cone Backface Backing Diameter |
151.90 mm 5.98 in |
Da - Cup Frontface Backing Diameter |
209.04 mm 8.30 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
4.3 mm 0.17 in |
a - Effective Center Location |
2.3 mm 0.09 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
99000 N 22300 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
382000 N 85900 lbf |
C0 - Static Radial Rating |
614000 N 138000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
82600 N 18600 lbf |
Factors | |
K - Factor | 1.2 |
e - ISO Factor | 0.49 |
Y - ISO Factor | 1.23 |
G1 - Heat Generation Factor (Roller-Raceway) | 363 |
G2 - Heat Generation Factor (Rib-Roller End) | 63.3 |
Cg - Geometry Factor | 0.134 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 74525-74850-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.