TIMKEN 838-832-B tapered bearings with Flange
Also known as : 838-832-B
- Inside Diameter: 80.963 mm
- Outside Diameter: 168.275 mm
- Width: 22.225 mm
- Basic dynamic load rating: 409 kN
- Basic static load rating: 522 kN
TIMKEN 838-832-B Bearing
TIMKEN 838-832-B Bearing details
Series | 835 |
---|---|
model | 838-832-B |
Cone Part Number | 838 |
Cup Part Number | 832-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
5.70 Kg 12.600 lb |
Dimensions | |
d - Bore |
80.963 mm 3.1875 in |
D - Cup Outer Diameter |
168.275 mm 6.6250 in |
D1 - Flange Outer Diameter |
177.698 mm 6.9960 in |
B - Cone Width |
56.363 mm 2.2190 in |
C - Cup Width |
41.275 mm 1.6250 in |
C1 - Cup Flange Width |
9.525 mm 0.3750 in |
T - Bearing Width to Flange |
22.225 mm 0.8750 in |
T1 - Bearing Width |
53.975 mm 2.1250 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
0.800 mm 0.03 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
93 mm 3.66 in |
db - Cone Backface Backing Diameter |
94 mm 3.7 in |
Da - Cup Frontface Backing Diameter |
154.94 mm 6.14 in |
Ab - Cage-Cone Frontface Clearance |
2.5 mm 0.1 in |
Aa - Cage-Cone Backface Clearance |
3.3 mm 0.13 in |
a - Effective Center Location |
-18.5 mm -0.73 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
106000 N 23800 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
409000 N 92000 lbf |
C0 - Static Radial Rating |
522000 N 117000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
54300 N 12200 lbf |
Factors | |
K - Factor | 1.95 |
e - ISO Factor | 0.3 |
Y - ISO Factor | 2 |
G1 - Heat Generation Factor (Roller-Raceway) | 198 |
G2 - Heat Generation Factor (Rib-Roller End) | 34.8 |
Cg - Geometry Factor | 0.0937 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 838-832-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.