TIMKEN 861-854-B tapered bearings with Flange
Also known as : 861-854-B
- Inside Diameter: 101.6 mm
- Outside Diameter: 190.5 mm
- Width: 22.225 mm
- Basic dynamic load rating: 458 kN
- Basic static load rating: 630 kN
TIMKEN 861-854-B Bearing
TIMKEN 861-854-B Bearing details
Series | 855 |
---|---|
model | 861-854-B |
Cone Part Number | 861 |
Cup Part Number | 854-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
7.100 Kg 15.60 lb |
Dimensions | |
d - Bore |
101.600 mm 4.0000 in |
D - Cup Outer Diameter |
190.5 mm 7.5 in |
D1 - Flange Outer Diameter |
199.923 mm 7.8710 in |
B - Cone Width |
57.531 mm 2.2650 in |
C - Cup Width |
44.450 mm 1.7500 in |
C1 - Cup Flange Width |
9.525 mm 0.3750 in |
T - Bearing Width to Flange |
22.225 mm 0.8750 in |
T1 - Bearing Width |
57.150 mm 2.2500 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
7.900 mm 0.310 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
114 mm 4.49 in |
db - Cone Backface Backing Diameter |
129 mm 5.08 in |
Da - Cup Frontface Backing Diameter |
174.24 mm 6.86 in |
Ab - Cage-Cone Frontface Clearance |
1.5 mm 0.06 in |
Aa - Cage-Cone Backface Clearance |
3.8 mm 0.15 in |
a - Effective Center Location |
-15.2 mm -0.6 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
119000 N 26700 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
458000 N 103000 lbf |
C0 - Static Radial Rating |
630000 N 142000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
68000 N 15300 lbf |
Factors | |
K - Factor | 1.74 |
e - ISO Factor | 0.33 |
Y - ISO Factor | 1.79 |
G1 - Heat Generation Factor (Roller-Raceway) | 264 |
G2 - Heat Generation Factor (Rib-Roller End) | 44.9 |
Cg - Geometry Factor | 0.107 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 861-854-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.