TIMKEN 86650-86100-B tapered bearings with Flange
Also known as : 86650-86100-B
- Inside Diameter: 165.1 mm
- Outside Diameter: 254 mm
- Width: 22.225 mm
- Basic dynamic load rating: 498 kN
- Basic static load rating: 644 kN
TIMKEN 86650-86100-B Bearing
TIMKEN 86650-86100-B Bearing details
Series | 86000 |
---|---|
model | 86650-86100-B |
Cone Part Number | 86650 |
Cup Part Number | 86100-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
8 Kg 17.600 lb |
Dimensions | |
d - Bore |
165.1 mm 6.5 in |
D - Cup Outer Diameter |
254.000 mm 10.0000 in |
D1 - Flange Outer Diameter |
263.525 mm 10.3750 in |
B - Cone Width |
46.038 mm 1.8125 in |
C - Cup Width |
33.338 mm 1.3125 in |
C1 - Cup Flange Width |
9.525 mm 0.3750 in |
T - Bearing Width to Flange |
22.225 mm 0.8750 in |
T1 - Bearing Width |
46.038 mm 1.8125 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
4.800 mm 0.190 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
176 mm 6.93 in |
db - Cone Backface Backing Diameter |
184.90 mm 7.28 in |
Da - Cup Frontface Backing Diameter |
239.01 mm 9.43 in |
Ab - Cage-Cone Frontface Clearance |
2.8 mm 0.11 in |
Aa - Cage-Cone Backface Clearance |
6.3 mm 0.25 in |
a - Effective Center Location |
-1.5 mm -0.06 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
129000 N 29000 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
498000 N 112000 lbf |
C0 - Static Radial Rating |
644000 N 145000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
81600 N 18300 lbf |
Factors | |
K - Factor | 1.58 |
e - ISO Factor | 0.37 |
Y - ISO Factor | 1.62 |
G1 - Heat Generation Factor (Roller-Raceway) | 466 |
G2 - Heat Generation Factor (Rib-Roller End) | 112 |
Cg - Geometry Factor | 0.1040 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 86650-86100-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.