TIMKEN 9275-9221-B tapered bearings with Flange
Also known as : 9275-9221-B
- Inside Diameter: 60.325 mm
- Outside Diameter: 161.925 mm
- Width: 23.012 mm
- Basic dynamic load rating: 298 kN
- Basic static load rating: 330 kN
TIMKEN 9275-9221-B Bearing
TIMKEN 9275-9221-B Bearing details
Series | 9200 |
---|---|
model | 9275-9221-B |
Cone Part Number | 9275 |
Cup Part Number | 9221-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
4.800 Kg 10.700 lb |
Dimensions | |
d - Bore |
60.325 mm 2.3750 in |
D - Cup Outer Diameter |
161.925 mm 6.3750 in |
D1 - Flange Outer Diameter |
171.450 mm 6.7500 in |
B - Cone Width |
46.038 mm 1.8125 in |
C - Cup Width |
30.163 mm 1.1875 in |
C1 - Cup Flange Width |
7.137 mm 0.2810 in |
T - Bearing Width to Flange |
23.012 mm 0.9060 in |
T1 - Bearing Width |
46.038 mm 1.8125 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
88.90 mm 3.5 in |
db - Cone Backface Backing Diameter |
102.10 mm 4.02 in |
Da - Cup Frontface Backing Diameter |
153.42 mm 6.04 in |
Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
Aa - Cage-Cone Backface Clearance |
6.9 mm 0.27 in |
a - Effective Center Location |
1.8 mm 0.07 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
77100 N 17300 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
298000 N 66900 lbf |
C0 - Static Radial Rating |
330000 N 74200 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
93600 N 21000 lbf |
Factors | |
K - Factor | 0.82 |
e - ISO Factor | 0.71 |
Y - ISO Factor | 0.85 |
G1 - Heat Generation Factor (Roller-Raceway) | 102 |
G2 - Heat Generation Factor (Rib-Roller End) | 18.4 |
Cg - Geometry Factor | 0.0984 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 9275-9221-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.